Yanmar 6′ Rotary Cutter with Slip Clutch

Description

Yanmar YRC206SCR 6-Foot Rotary Cutter with Slip Clutch Driveline

The YRC206SCR is the heaviest-duty combination in Yanmar’s single-spindle cutter family: a 6-foot deck with slip clutch protection, designed for utility tractors clearing large areas of rough, uneven land. It suits ranches, hunting properties and farms reclaiming ground that has sat unmown for years.

Handling Heavy Cutting

On a wide cutter, a blade strike carries more energy through the driveline, which is why the slip clutch matters most at this size. The friction plates absorb repeated impacts from rocks and stumps without stopping the job. Blades are heat-treated and free-swinging, the deck rides on full-length skid shoes, and the tail wheel is laminated for puncture-free service. Checking gearbox oil with EP 80-90W gear oil at the start of each season is the main routine task.

• Cutting Width: 6′
• Cutting Height: 1.5″ – 9″
• Cutting Capacity: up to 1″
• Blade Tip Speed: 14,974 ft./min.
• Frame Thickness: 12 Ga.
• Hitch: Category 1
• PTO Speed: 540
• Suggested tractor size: 25 to 60 HP
• Driveline protection: slip clutch

Who Needs This Cutter

Pick the YRC206SCR for tractors from about 25 to 60 HP working rough ground. For clean pasture, the shear pin YRC206R costs less at the same width, and the YRC306 is Yanmar’s 300 Series 6-foot option.