Scag Jackal 40″ Kubota 24.8HP

$34,999.00

MONTHLY PAYMENT OPTIONS:
$585 5.99% / 60 mo
$651 0% / 48 mo
$884 3.99% / 36 mo
Monthly Plans Shown From Sheffield Financial
Click here for more details

In Stock

SKU: SJ1125-W-40-25KBD Category:
Customize Your Hang Tag Prices: ▼

Loan Payment Variations

Customize monthly payments for each term (leave blank to use calculated values):

36 Months - 3.99% Interest

48 Months - 0% Interest

60 Months - 5.99% Interest


Description

Scag Jackal 40 Inch Stand-On Mini Skid Steer with Kubota Diesel

The Jackal is Scag’s stand-on mini skid steer, and this configuration pairs the wider 40 inch track frame with a 24.8 horsepower Kubota D1305-E4B diesel. It is a material-handling machine first, sized to reach places a full skid steer cannot and to lift more than a crew can carry.

Lift, Reach and Hydraulic Capacity

Rated operating capacity is 1,125 lbs with a tipping load of 3,142 lbs, and the hinge pin reaches 83 inches, which is what allows the machine to dump over the side of a container or into a truck bed rather than only onto the ground. Auxiliary hydraulic flow runs up to 15 GPM at 3,000 psi, enough to drive augers, breakers and rotating grapples rather than only buckets.

  • Engine: Kubota D1305-E4B diesel, 24.8 HP
  • Rated operating capacity: 1,125 lbs
  • Tipping load: 3,142 lbs
  • Hinge pin height: 83 inches
  • Auxiliary hydraulics: up to 15 GPM at 3,000 psi
  • Fuel: 12 gallons total in dual 6 gallon tanks
  • Tracks: dual 7 inch standard, 9 inch optional, 5.5 psi ground pressure

Ground Pressure and Where It Lets You Work

At 5.5 psi on the standard tracks the Jackal exerts less ground pressure than a loaded wheelbarrow pushed by one person, which is the practical reason it can cross finished turf and cured slabs that a wheeled machine would mark. Switching between the narrow and wide track sets is a field job rather than a shop job, so the same machine can be set up narrow for gated access in the morning and wide for flotation on soft ground later.

Picking a Track Width and an Engine

Take the 40 inch frame if your work is open enough to use the stability, and check your narrowest gate before committing, because the SJ1125-N-34-25KBD runs the same Kubota on a 35.5 inch frame that clears standard residential access. On engines, the Kubota here and the Kohler KSD1403 in the SJ1125-W-40-25KSD are priced alike, while the Yanmar SJ1125-W-40-25YMT sits higher. Pick the brand your existing fleet and local service already support.

Stock Number:SJ1125-W-40-25KBD
Number in Stock:1
Commercial or Residential

Condition

Deal

Engine

Engine Brand

Fuel Type

Horsepower

Main Category

Make

Model

Series

×