Scag Liberty Z 52″ Kohler 24HP

Description

Scag Liberty Z 52 Inch Zero-Turn with 24 HP Kohler 7000 Series

The Kohler-powered 52 inch Liberty Z carries a 24 horsepower 7000 Series PRO behind the Hero deck, and it undercuts the Kawasaki version by a useful margin while offering slightly more output.

A Level Deck Is What Produces a Level Lawn

The single most common cause of an uneven finish on a wide domestic deck is not blades or engine but a deck that has drifted out of level. It happens gradually as hangers settle and tyres lose pressure, so nobody notices the day it starts. The symptom is a cut that steps down slightly on one side of every pass, visible in low sun and invisible at midday.

• Cutting width: 52 inches, Hero cutter deck
• Engine: Kohler 7000 Series PRO, 24 HP
• Forward speed: up to 7 mph
• Deck lift: spring-assisted foot pedal
• Deck spindles: aluminium housings, sealed ball bearings
• Seat: contoured high-back with armrests

Checking Level Without Special Tools

Park on genuinely flat ground, set the tyres to their correct pressures first, then measure from the floor to the blade tip at the front and rear of one blade and repeat side to side. The manual gives the intended relationship between front and rear. Ten minutes once a season catches a problem most owners take to a workshop and pay to diagnose.

Battery and Terminals

Corrosion at the battery terminals is the commonest cause of a mower that turns over slowly or not at all, and it looks like a failed starter to anyone who has not checked. A wire brush and a smear of grease once a season prevents it. On a machine parked through winter, disconnecting the negative lead is worth more than any charger.

Value Across the 52 Inch Range

Against the SZL-52H-23FR this saves money and adds a horsepower. The SZL-52H-24SR is cheaper again with a Scag SR engine at the same output, and the SZL-52H-24PX is the most expensive of the four. All share deck, frame and drive.