2025 Brown Products Limb Trimming MPT40

Information

2025 Brown Products Limb Trimming MPT40

The “Limb Tremor” is designed to be mounted on utility and compact tractors specifically for trimming tree limbs and also cutting brush. Its design allows the attachment to be used as a traditional front mounted cutter/mower with the ability to reposition the cutter to an off-set side mower, bank/ditch mower (-10 to +45 degrees), and a vertical limb trimmer. Change from one position to another in a matter of minutes.

Features may include:

  • 1-year limited warranty: Commercial and Rental
  • 30"-40" wide cut, vertical height up to 13 feet depending on tractor model
  • 12 gage steel with a 5/16th inch reinforced spindle plate
  • Blade speed 980 rpm at tractor pto speed of 540 rpm
  • Blade can start in any position
  • 0 - Full RPM in 5 seconds

Photos

Highlights

  • Chambersburg, Pennsylvania
  • 2025
  • Brown Products
  • Limb Trimming MPT40
  • Available
  • Cut: vertical up to 13 feet depending on tractor model

Specifications

  • 2025
  • Brown Products
  • Limb Trimming
  • MPT40
  • General
  • Danfoss Hydraulic Motor 15 gpm with 13 tooth splined drive
  • One piece cast iron spindle housing
  • Blade: 980 rpm at tractor | pto: of 540 rpm
  • Deck: Articulated -10 to +45 degrees with float wheel for bank mowing | Angle Reinforcement: 1/4" x 2 1/2" x 2 1/2" | Blade Diameter: 40" diameter, 1/4" 5 gauge) thick Hi-flex non-cracking alloy steel | forged flanged shaft: 2”
  • Cut: 40"
  • Cut: vertical up to 13 feet depending on tractor model